Linksys SPA3102 - Standard VOIP Line & Local Access Number Line Config Guide

Help

Welcome
Common Topics
Knowledgebase
Configuration Guides
Glossary
Contact Us

Quick links:
User Guide Quick Installation Data Sheet Firmware v5.1.7 Firmware v5.1.10 Contact Linksys Manufacturer's Site

Linksys SPA3102 - Standard VOIP Line & Local Access Number Line

The SPA3102 supports one RJ-11 POTS (Plain Old Telephone Service) FXS port to connect an existing analog phone or fax machine. The SPA3102 also supports one PSTN FXO port to connect to a Telco or PBX circuit. The SPA3102 includes 2 100BaseT RJ-45 Ethernet interfaces to connect to a home or office LAN, as well as an Ethernet connection to a broadband modem or router. The SPA3102 FXS and FXO lines can be independently configured via software controlled by the service provider or the end user.

Installed by the end user and remotely provisioned, configured and maintained by the service provider, each SPA3102 converts voice traffic into data packets for transmission over an IP network. Compact in design, the SPA3102 can be used in consumer and business VoIP service offerings including a full-featured IP Centrex environment. The SPA3102 uses international standards for voice and data networking for reliable voice and fax operation.

STEP 1
Connect one Ethernet cable from your SPA3102’s ETHERNET port to the Ethernet port on your computer.

*PLEASE NOTE* Do not connect any other cables to the SPA3102 during initial configuration. (Cable/DSL/Router or Analog phone cables) If you connect anything other than this one cable, you will not be able to log into the device.

Now we must determine the address for your device so that it can be accessed and configured with you browser. To do this, we will need to find out what gateway address the device has given your computer.

To find the current gateway:

WINDOWS XP

Click Start
Click Run
Type CMD and press <enter>
Type IPCONFIG and press <enter>

In the returned list of information please find the section labeled LOCAL AREA CONNECTION and write down the default gateway.

EXAMPLE

Ethernet Adapter Local Area Connection:


Connection-specific DNS Suffix
IP Address	192.168.0.2
Subnet Mask	255.255.255.0
Default Gateway	192.168.0.1

STEP 2
Open up the web browser on the computer that is connected to the device and enter in the gateway address given to you.

EXAMPLE

(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1).

STEP 3
Click on the "Admin Login" button near the top right side of the screen, then click on the
"Line 1" tab.

STEP 4 You need to modify only a few parameters from the factory default. They are listed here:

Proxy:	sip.varphonex.com
Display Name:	Enter your full name, this will show up as part of your callerid.
User ID:	Enter the phone number you chose when you signed up for VarPhonex service.
Password:	Enter the password that you chose when you signed up for VarPhonex service.
Register Expires:	3600

STEP 5 Click on “PSTN Line” Tab. Note: In order to use the Local Access Number/PSTN option, you must set up a new (secondary) free Virtual Number in your control panel.
Modify only the circled items of the following:
Proxy:	sip.varphonex.com
Register Expires:	300
Display Name:	Enter your full name.
Userid:	Enter the new virtual phone number that you just added to your account, as mentioned in the note above.
Password:	Enter the password that you chose when you signed up for VarPhonex service.

STEP 6
Change the “Preferred Codec” to G729a. Also be sure that the “Use Pref Codec Only” option is set to NO. You can do this for both Line 1 and PSTN (i.e. if you are going to use PSTN).

Linksys SPA3102 Configuration

STEP 7
Make calls!

VarPhonex offers the industry leading VoIP Reseller Program. We let you sell VoIP in your brand name including Internet phone service, SIP termination, SIP Trunking, International DID numbers and unlimited VoIP plans. We also offer prepaid phone service using our voice over IP system and an analog telephone adapter, softphone, PBX, Asterisk, Trixbox or other VoIP device which can use a SIP Trunk. VarPhonex white label VoIP solutions are designed so you can private label our home phone service, business phone service, call shops service and phone service for cyber cafes. VarPhonex is proud to support Internet telephony equipment including Sipura, Linksys, Cisco, Digium, Grandstream and more. We offer low cost A to Z rates and provide International VoIP termination along with DID phone numbers for private label resale.

| | | | | | | | | | | |